Use FLUX to analyze the motor efficiency MAP Preparations before simulation: 1. A motor model that has been physically checked (do not create any scenario):2 Circuit model (including the circuit for calculating permanent magnet loss, it is necessary to set the permanent magnet resistivity and establish three parameters Speed, Ipk, gama):3 Matrix required for operation, …
In this article, we will focus on two aspects: 1. How to set up hardware support for Arduino in MATLAB software. 2. How to control the Arduino development board using MATLAB code. We usually use Arduino IDE to write the code and then upload it to the Arduino development board. The advantage of using …
Graphs always help to visualize data and it becomes very easy to find trends and patterns by looking at them. There are many software available for plotting graphs based on input values. Today we will use MATLAB to plot graphs based on the temperature data from the LM35 sensor. This article will introduce the basic …
I have been working on Simplorer-Maxwell Co-simulation recently. There is so little information on this topic that I can only summarize some experience on my own. I am going to share it with you to prevent you from being stuck with similar problems in the future. 1. About the setting of external inductance and resistance …
1. Overview For motor engineers, motor design often involves the interaction between the control system and the motor itself. In previous versions, this had to be done in Simplorer software, which not only increased corporate costs, but also required engineers to master the use of Simplorer software, as well as the simulation settings and simulation …